Coated Aluminum Plate Water Based Drawing Fluid

【Product Performance】

Coated Aluminum Plate Water-Based Drawing Fluid (CUT-524A) is a water-based drawing fluid specially designed for the stretching of aluminum and copper materials. It has excellent lubricity, anti-oxidation properties, and can effectively prevent "stretch marks, scratches and cracks" that occur during the stretching process. This product can protect the mold and significantly extend the service life of the mold.

【Product Parameters】

【Usage】

1. The oil tank or oil tank should be cleaned before using this product. It is strictly prohibited to mix it with other oil products. It should be stirred evenly before use.

2. Water-to-water ratio: direct raw solution stretching or water-to-water ratio: raw solution: water = 1: (1-5)

3. The working fluid concentration should not be less than 5. The appropriate working fluid concentration should be adjusted according to different anti-rust requirements.

【Packaging Specifications】

18L/plastic bucket, 200L/large iron bucket.

Coated Aluminum Plate Water-Based Drawing FluidCUT-524A .pdf

Features:

Excellent lubricity: This water-based drawing fluid provides excellent lubrication, reduces the friction between the metal surface and the mold during the stretching process, and prevents surface damage.

Antioxidation: CUT-524A has strong antioxidant ability, which can effectively prevent aluminum and copper materials from oxidizing during processing, ensuring the quality of the material.

Easy to clean: Compared with traditional oil-based liquids, this water-based liquid is easy to clean, reducing the difficulty and cost of the cleaning process.

Strong coating adhesion: The product coating can be firmly attached to the metal surface, ensuring that it will not fall off or be damaged during processing, and maintaining a stable processing effect.

Short drying time: CUT-524A coating has a short drying time, which reduces the waiting time in the production process and improves work efficiency.

Advantages:

Mold protection: Due to its good lubricity and antioxidant properties, CUT-524A Water Based Drawing Fluid effectively reduces mold wear and extends the service life of the mold.

Reduce surface defects: It can effectively prevent the generation of "stretch marks, scratches and cracks", thereby improving the surface quality of the product.

Environmental protection: As a water-based product, CUT-524A Water Based Drawing Fluid  does not have the pollution problems of traditional oil-based liquids, meets environmental protection standards, and reduces the negative impact on the environment.

Coating adhesion and drying time: Its strong coating adhesion ensures that the material surface remains smooth and can be dried in a short time, saving production time and energy.

Specific application:

CUT-524A is suitable for the stretching processing of metals such as aluminum and copper, and is widely used in the metal processing industry, especially in the forming, stamping and stretching of aluminum and copper materials.

Scope of use:

Aluminum processing: Using CUT-524A Water Based Drawing Fluid  in the process of aluminum stretching and stamping can effectively reduce surface damage and improve the finish of the product.

Copper processing: In the copper stretching process, the product also provides excellent lubrication, reduces friction and prevents oxidation.

Mold protection: Suitable for the protection of various metal processing molds, extending the service life of the mold and reducing wear.

Large-scale production: CUT-524A Water Based Drawing Fluid  is very suitable for mass production, helping to improve production efficiency and quality stability.

CUT-524A Coated Aluminum Plate Water-Based Drawing Fluid is a highly efficient water-based fluid with strong lubricity, oxidation resistance and environmental protection properties. It is widely used in the processing of aluminum, copper and other metals, especially in the process of drawing and stamping. It has great advantages in metal surface quality and mold protection.

FAQ

What preparations are required before using CUT-524A Coated Aluminum Plate Water Based Drawing Fluid?

Before using CUT-524A, make sure the oil tank or oil pool is clean and avoid mixing with other oils. Stir the product evenly before use and adjust the dilution ratio as needed. It is recommended to set the ratio of stock solution to water to 1: (1-5), and the specific ratio can be adjusted according to the anti-rust requirements. Ensure that the working fluid concentration is not less than 5%.

How to adjust the concentration of Coated Aluminum Plate Water Based Drawing Fluid?

The concentration of CUT-524A can be adjusted by the mixing ratio of stock solution and water. Generally, the ratio of stock solution to water is 1: (1-5), and the appropriate concentration can be adjusted according to different anti-rust requirements. Ensure that the working fluid concentration is not less than 5%.

How long does it take for the coating of CUT-524A Coated Aluminum Plate Water Based Drawing Fluid to dry?

The CUT-524A coating has a short drying time and can usually be dried in a short time, reducing waiting time during production. The specific drying time will be affected by factors such as ambient temperature, humidity and coating thickness.

Is Water Based Drawing Fluid easy to clean?

Yes, CUT-524A is a water-based product, which is easier to clean than traditional oil-based products. Product residues can be easily removed using water and appropriate detergents, reducing the workload of cleaning.

Will the use of CUT-524A cause damage to the metal surface?

No. CUT-524A has excellent lubricity, which can effectively reduce the friction between the metal surface and the mold, thereby preventing the generation of "stretch marks, scratches and cracks" and ensuring the finish and quality of the metal surface.

Is Coated Aluminum Plate Water Based Drawing Fluid suitable for all types of metal processing?

CUT-524A is mainly suitable for the stretching and stamping of metals such as aluminum and copper, and has good lubrication and anti-oxidation properties. If it needs to be used for other metal processing, it is recommended to confirm the applicability with the supplier before use.

What impact does the use of Coated Aluminum Plate Water Based Drawing Fluid have on the mold?

CUT-524A can effectively reduce mold wear and provide good mold protection. Its lubricating properties can reduce the friction between the metal and the mold, thereby extending the service life of the mold and reducing the cost of repair and replacement.

Is Coated Aluminum Plate Water Based Drawing Fluid environmentally friendly?

Yes, CUT-524A is a water-based fluid that meets environmental standards and reduces pollution to the environment. Compared with traditional oil-based drawing fluids, it is more environmentally friendly and suitable for the needs of modern production environments.

Can production start immediately after using Coated Aluminum Plate Water Based Drawing Fluid?

Yes, the coating of CUT-524A can be quickly prepared after drying, which is suitable for efficient production. The coating has a short drying time, which can save waiting time and quickly enter the production process.