Galvanized Plate Water Based Drawing Fluid

【Product Performance】

Galvanized Plate Water-Based Drawing Fluid (CUT-524DX) is a water-based drawing fluid designed for galvanized sheet stretching. It is mainly used to provide good lubrication and anti-oxidation protection when stretching galvanized sheet. It can effectively prevent problems such as "scratches, indentations, cracks" generated during the stretching process, and can protect the mold and extend the service life of the mold.

【Product Parameters】

【Usage】

1. The oil tank or oil tank should be cleaned before using this product. It is strictly prohibited to mix it with other oil products. It should be stirred evenly before use.

2. Water-to-water ratio: direct raw solution stretching or water-to-water ratio: raw solution: water = 1: (1-5)

3. The working fluid concentration should not be less than 5. The appropriate working fluid concentration should be adjusted according to different anti-rust requirements.

【Packaging Specifications】

18L/plastic bucket, 200L/large iron bucket.

Galvanized Plate Water-Based Drawing Fluid CUT-524DX .pdf

Functions and features:

Lubricity: Provides excellent lubrication, ensures reduced friction during stamping, and prevents damage to the mold surface.

Antioxidation: Effectively prevents oxidation of galvanized sheets, keeps the surface of the sheet clean, and avoids quality problems caused by oxidation.

Easy to clean: The water-based formula makes the cleaning process easier, reducing cleaning costs and time.

Protects the mold: Effectively protects the mold, reduces wear, and extends the service life of the mold.

Prevents scratches and cracks: Reduces surface damage caused by excessive friction during processing.

Uses and scope of use: This product is suitable for stretching and stamping processes of galvanized sheets, especially in precision processing that requires prevention of surface scratches, cracks and oxidation. It is widely used in automobile manufacturing, home appliance production, metal sheet processing and other fields.

Compatibility: CUT-524DX water-based drawing fluid is compatible with a variety of metal materials, especially suitable for stretching and forming of galvanized sheets. When using, the oil tank or oil tank must be clean and must not be mixed with other oils to ensure the best effect.

Environmental protection and safety: As a water-based product, CUT-524DX meets environmental protection standards, has low VOC (volatile organic compound) content, no irritating odor during use, is safer, and reduces the impact on the health of operators.

Coating effect: The water-based drawing fluid can form a uniform and stable coating on the metal surface, prevent surface damage caused by friction, and ensure the clarity and durability of the pattern or mark.

Durability: The coating has good wear resistance and water resistance, can effectively protect the metal surface for a long time, and can withstand the stress generated during stretching and stamping, extending the service life of the mold and metal surface.

Drying time: The drying time is moderate, which can not only ensure the processing efficiency, but also will not affect the protective effect of the coating. The specific drying time can be adjusted according to the use concentration and working environment.

Usage: Before use, make sure the oil tank is clean and stir the product evenly. The recommended water to stock solution ratio is 1:1 to 1:5. The specific concentration can be adjusted according to the anti-rust requirements and processing conditions to ensure that the working fluid concentration is not less than 5%.

FAQ

When using CUT-524DX water-based drawing fluid, can it be mixed with other oils?

No. Before use, make sure that the oil tank or oil tank is clean, and strictly prohibit mixing with other oils. This ensures that the water-based drawing fluid performs best and avoids affecting its lubricity and antioxidant properties.

How to adjust the concentration of CUT-524DX water-based drawing fluid?

The concentration of CUT-524DX should be adjusted according to the specific anti-rust requirements and processing conditions. Generally, the recommended water-to-stock ratio is 1:1 to 1:5, ensuring that the working fluid concentration is not less than 5%. The proportion of water can be increased or decreased appropriately according to the specific situation.

What should I do if the coating of the drawing fluid falls off or is uneven during processing?

First, check whether the concentration of the working fluid is appropriate and ensure that the concentration is not less than 5%. Secondly, confirm whether the water and stock fluid are mixed according to the recommended ratio. Finally, check whether there is any incomplete cleaning during operation. If necessary, re-clean the oil tank or oil tank, stir it evenly and use it again.

Is it easy to clean after using the water-based drawing fluid?

Yes, CUT-524DX is a water-based formula that is easier to clean after use. Generally, it can be directly rinsed with clean water, which reduces the difficulty and cost of cleaning with traditional oil-based drawing fluids.

How long does it take for the coating to dry? Will it affect processing efficiency?

The drying time of CUT-524DX is moderate and will not affect processing efficiency. The specific drying time may vary depending on environmental conditions, coating concentration and temperature. Usually, the ideal drying effect can be achieved within a short time after coating.

If the mold is found to be damaged during use, is it related to the drawing fluid?

If the mold is damaged, it may be related to the concentration or cleanliness of the drawing fluid. Please ensure that the concentration of the working fluid is correct and the oil tank or oil tank is clean. If the coating is uneven or the concentration is too low, it may cause increased wear on the mold surface.

Is CUT-524DX suitable for all galvanized sheets?

CUT-524DX is particularly suitable for stretch forming and stamping processes of galvanized sheets, especially for precision processing that needs to prevent surface scratches, cracks and oxidation. For other types of metal materials, it is recommended to conduct a small-scale test before use to ensure the best effect.

If you need to store the product during use, how should you store it?

CUT-524DX should be stored in a cool, dry place, away from direct sunlight. The storage temperature should be kept at room temperature to avoid high or extremely low temperatures that may adversely affect the performance of the product.