DK-760C8 Glass Cutting Fluid

DK-760C8 Glass Cutting Fluid is a high-performance glass cutting lubricant designed for the glass processing industry. It is a neutral, environmentally friendly liquid with excellent lubricity, cooling, cleaning and corrosion resistance. It can effectively reduce cutting resistance, improve cutting accuracy, and extend the service life of the cutter wheel during glass cutting, while preventing glass edge cracking and breakage.

This cutting fluid is suitable for cutting processes of various types of float glass, ultra-thin glass, optical glass, tempered glass, and precision glass products such as electrical appliances, home appliances, display panels, and touch screens. Due to its low odor, no corrosion, and easy cleaning characteristics, it has a wide range of application value in automated glass production lines.

【Main technical parameters】

【Instruction】

1. Dilution of the stock solution with 20-30 times tap water or deionized water is the working liquid, or depending on the difficulty of processing and the actual situation.

2. During use, the working liquid can be supplemented at a concentration of 3-5%.

【Packaging】

18L/ barrel, 25L/ barrel, 200L/ barrel.

Glass cutting fluid DK-760C8.pdf

Material:

Water-soluble base liquid: deionized water or refined water is used as the solvent base to ensure compatibility with glass process equipment;

Synthetic lubricant: non-oily lubricating molecules form a protective film on the cutting contact surface to reduce friction;

Rust-proof and antibacterial ingredients: prevent metal cutter wheels or mechanical parts from rusting or breeding microorganisms in long-term contact;

Hard water ion formula: maintains stable performance in hard water environment and is not easy to scale;

Neutral pH value: ensures non-corrosiveness to materials such as glass, metal, and sealing rings;

Volatilization balance regulator: avoids excessive evaporation in an open environment to extend the service life.

Use:

Glass cutting lubrication: reduce the friction between the cutter wheel and the glass surface;

Reduce cutting heat and prevent glass stress fracture.

Automated cutting equipment application:

Can be used for CNC glass cutting machines and fully automatic glass cutting lines;

Achieve fine control and compatibility with liquid distribution systems.

Ultra-thin glass processing:

Suitable for high-precision cutting of ultra-thin glass below 0.3mm;

Reduce the probability of micro-cracks and edge collapse in the incision.

Optical glass and cover glass production:

Meet the high requirements for cleanliness, cutting accuracy and subsequent processing;

Easy to connect with subsequent cleaning and laminating processes.

Cutting of glass substrates for electronic component packaging:

Suitable for high-end displays, touch panels, and camera cover glass;

Improve the yield rate and reduce the rework rate.

Features:

Strong lubricity:

Form a continuous lubricating film during the cutting process to reduce the friction coefficient;

Effectively improve the service life of the cutter wheel and reduce the maintenance frequency.

Excellent cooling:

Quickly remove the local heat generated by cutting;

Keep the temperature of the glass and cutter wheel stable to prevent thermal expansion and deformation.

Excellent volatility control:

The evaporation rate is moderate and it is not easy to dry too quickly;

No frequent addition or replacement is required during use.

Low residue and easy to clean:

Almost no residue remains on the glass surface after cutting;

Can directly enter the next process such as cleaning, laminating, and printing.

Non-toxic and non-corrosive:

No irritating odor, no damage to hands or glass;

Long-term contact with glass, knives, and seals will not cause corrosion.

Good antibacterial and anti-rust properties:

No odor or deterioration during storage or long-term shutdown;

No risk of rust on metal parts of equipment such as steel and copper.

Advantages:

Improve cutting efficiency

Reduce friction resistance of the cutter wheel and increase processing speed;

Achieve continuous production and adapt to automation systems.

Ensure glass quality:

Cutting edges are neat and without edge collapse;

Improve the yield rate of subsequent hot bending, tempering, and bonding.

Reduce production losses:

Extend the life of the cutter wheel and reduce the frequency of consumable replacement;

Reduce the glass breakage rate and rework probability.

Optimize workshop environment:

Low odor and non-volatile;

Improve the cleanliness of the operating area and provide better employee experience.

Environmental protection and compliance:

Environmentally friendly ingredients, in compliance with international environmental standards such as RoHS and REACH;

Emission treatment is simple and suitable for large-scale industrial applications.

FAQ:

Can DK-760C8 be used to cut glass of various thicknesses?

Yes. DK-760C8 is suitable for a variety of glass thicknesses ranging from ultra-thin to medium-thick, such as 0.3mm, 0.5mm, 2mm, 5mm, etc. The lubrication effect is stable during the cutting process and does not affect the cutting accuracy.

Is additional cleaning required after use?

Generally, no special cleaning is required. The liquid has low residue and is easy to volatilize. There is almost no visible trace on the glass surface after cutting, and it can directly enter the next lamination, tempering or printing process. However, if it is used for products with high cleanliness requirements such as optical glass, it is recommended to use pure water rinsing.

Are there any restrictions on the material of the cutting wheel?

There are no restrictions. DK-760C8 is compatible with cutting wheels made of tungsten steel, tungsten carbide, stainless steel, etc., and has excellent lubrication and protection performance among various materials.

How should it be stored and managed during use?

It is recommended to store it in a cool, dry, dark place and seal it to avoid long-term exposure to air and cause performance degradation. When using it, avoid mixing foreign matter or other liquids to avoid affecting performance.

Can a circulating liquid supply system be used?

Yes. DK-760C8 has good stability and anti-pollution ability, and is suitable for use with an automatic liquid supply system to achieve long-term stable cutting operation.