Stainless Steel Cutting Oil

【Product Performance 】

CUT-813 cutting oil is specially designed for stainless steel, high carbon steel and a special cutting oil, with superior anti-sintering function and anti-friction characteristics, can greatly reduce tool wear, improve the surface quality of the workpiece, this oil is not suitable for copper processing.

【Product Parameters 】

【Performance Characteristics 】

★ Lubricity: Possesses excellent extreme pressure and friction reduction properties, with superior anti-seizure function, effectively ensuring the surface brightness of the processed parts and extending the tool life.

★ Excellent Cooling: Capable of removing the heat generated by intense friction during high-speed machining, reducing odor and component deformation to a minimal level.

★ Excellent Operability: Transparent in color, making it easy to observe the workpiece during machining. Low odor and low oil mist, making it easy for operators to adapt.

Stainless steel cutting oil is a specialized lubricant designed to enhance machining performance, tool longevity, and surface finish quality when working with stainless steel alloys. Here are 4 to 6 key characteristics with technical data:

1. Extreme Pressure (EP) Performance: Formulated with sulfur and chlorine-based additives, premium stainless steel cutting oils deliver EP values exceeding 1,200 N (ASTM D3233) to prevent welding and galling during high-load operations like threading or drilling.

2. Thermal Stability: Advanced formulations maintain viscosity within ±5% at temperatures up to 300°C (572°F), as per ISO 3448 standards, ensuring consistent lubrication during high-speed machining (50-120 m/min cutting speeds).

3. Corrosion Inhibition: With copper strip corrosion ratings of 1A (ASTM D130) and neutralization numbers below 0.5 mg KOH/g, these oils provide 500+ hours of protection against stainless steel pitting in humid environments.

4. Chip Evacuation: Low dynamic viscosity (typically 15-25 cSt at 40°C) combined with high wetting tension (>35 mN/m) ensures efficient chip removal, reducing recutting and improving surface finishes to <0.8 μm Ra.

5. Tool Life Extension: Laboratory tests show 300-400% increase in tool life (ISO 3685) for carbide tools when using optimized cutting oils versus dry machining, with flank wear rates reduced to <0.1 mm/hour.

6. Environmental Safety: Modern formulations meet OECD 301B biodegradability standards (>60% in 28 days) with flash points above 180°C (356°F) and VOC content <50 g/l, complying with EU Ecolabel requirements.

【Scope of Application】

● Widely used, especially recommended for stainless steel, alloy steel materials, milling, drilling, tapping, punching and so on. This product is not suitable for copper processing.

【Packaging Specifications】

18L/ plastic bucket, 200L/ large iron bucket.

Stainless Steel Cutting Oil Cut-813.pdf